Shower Control Height

I find if you have a shower valve fitted over the bath then 1300mm off the floor is a good height.
Shower control height. As long as the controls are within 38 to 48 inches off the floor the stall is in compliance. The minimum height for the shower controls area is 38 inches above the floor. The architect is given a 10 inch leeway to place the controls.
Add separate volume control valves to adjust the flow of each component showerheads handshowers body sprays. If there are regulations governing installation your dilemma is resolved for you. When determining the height of your shower head and control valve always check your local building codes first.
If the homeowner prefers an adjustment in heights then the shower head can be roughed in higher or lower. A height of 28 inches or 2 feet 4 inches is standard for valves in bathtub shower units. Looking up local building codes is a great starting point if you want to install your shower valve at the right height.
The shower head normally is located 72 to 80 inches above the finished floor. The height of the valve for a shower depends upon whether you need it for a shower stall or a shower set in a bathtub. If valve is over a shower tray in a cubicle then around 1m from top of shower tray.
The temperature control should be placed about waist high approximately 36 from the bottom of the shower enclosure. If your shower is also a bathtub ensure that the valve is low enough for bathers to use it but you can place it around 45 inches from the ground if the shower does not include a bathtub. If you are installing a new standard shower user height is one of the most important things to consider.
Shower controls should be placed at a height 40 50 102 127 cm above the shower floor and out of direct line of the water path to avoid being caught in extremely cold or hot water when operating. Shower heads are located at a standard height of 80 203 cm but can be set at a minimum height of 72 183 cm if desired. The maximum height above the floor is 48 inches.